CALDEK Sundeck Systems is proud to be Calgary's exclusive Duradek dealer. Since 1974, Duradek products have been solving sundeck water proofing problems for thousands of people, with over 60 million square feet of Duradek installed in North America. Tough, outdoor PVC laminated with polyester or Fiberglass backing Duradek withstands the heaviest residential or commercial abuse for years.
Duradek can be applied over almost any flat surface, new or old in virtually any weather and can be used immediately. Duradek membranes will outlast "painted on" surfaces by years.
Available in many decorator colors and patterns, Duradek products are 100% waterproof allowing the area beneath to be used as a workshop, playroom, garage, storage, sauna . . . all backed by a full five-year written guarantee. That's what keeps us the industry leaders in quality, service and selection.
All Duradek products have embossed surfaces for safe footing. Test results show vinyl to be even less slippery when wet. Duradek is also waterproof, cleanable, fire retardant, mildew resistant, U.V. resistant and extremely durable.
CALDEK Sundeck Systems, the leaders in innovative products for maintenance - free living are now offering a complete sundeck design, construction and consultation department.
Computer-aided design allows for complete estimating of materials and flexibility in design changes. Whether building cedar or plywood surface decks, construction materials are of the highest quality.
In Canada and United States, these products meet accepted code specifications for decking materials of their class having passed applicable ASTM Tests. Complete test results available upon request. The CCMC evaluation report number for Duradek is 9643 Surcoseal is 10930.
- Products can be applied to almost any flat dry surface.
- Virtually maintenance free
- Fire, mildew, U.V. and slip resistant
- Fast installation, usable immediately
- Protects lumber from rotting
- Heat welded overlap seams
- 5-year written warranty
- 1-year free service warranty
- Largest selection of designer colors and film thickness
- Adds another attraction, bright usable areas to your home.
DURADEK . . . ONE TOUGH DECK
DESIGNING FOR DURADEKS SINGLE PLY WATERPROOF MEMBRANE SYSTEMS
If any of Duradek's products are to be applied to an existing structure, accommodations can be made. However, a bit of preplanning in remodeling job or new deck design can ease application and help assure maximum performance.
First, it must be remembered that the membrane has to extend up any inside wall, and be covered with siding or flashing, or be secured and waterproofed by some other means.
This means that doorways and trim materials should be kept at least one and one half inches above the deck level to allow for membrane turn-up. In most cases the vinyl should be applied before the siding, which can be lapped down over it. To Provide 100% waterproofing.
Second, the membrane should extend out over and down any exterior (drainage) edge. This may or may not (depending upon what is below and the deck design) require a drip deflection device. Where exterior drainage is not possible our dealers can provide special drains or scuppers.
Decks should be designed with a minimum drain slope of one inch over each eight feet to avoid pooling and puddling of the water.
If possible, railings and structural supports should be designed to fasten to the outer edges of the deck. This provides more usable room and avoids having to puncture the water proofing membrane. Caulking must be applied to any screws to fasten top mounted railings.
Click here to visit the DURADEK homepage